8
yakev724's latest activity
-
A friend of mine got some VMR V810’s that are 19 X 8.5” et45. He was over as I was installing an H&R RSB so I figured why not test fit... -
yakev724 replied to the thread Aftermarket Amp - Ground Loop diagnosis?.My issue here was the amp I was using, it didnt support signal input. As soon as swapped to an amp that did everything was fine.
-
yakev724 replied to the thread Understanding the MK7 PCV function, retrofitting the MK8 PCV, and why catch cans are bullshit(IMO).My understanding is EQT has a different design to most other aftermarket charge pipes. Half of what would typically be a hard pipe is...
-
yakev724 replied to the thread Understanding the MK7 PCV function, retrofitting the MK8 PCV, and why catch cans are bullshit(IMO).The EQT hose is larger than stock, therefore only the supplied EQT TMD will work with it. Hence all the drama with bungs and hoses, 034...
-
yakev724 replied to the thread Understanding the MK7 PCV function, retrofitting the MK8 PCV, and why catch cans are bullshit(IMO).Tricky with the EQT TMD - I was originally planning to do that but it's really built to maximize ID, leaving really thin walls, making...
-
yakev724 reacted to GTIfan99's post in the thread Understanding the MK7 PCV function, retrofitting the MK8 PCV, and why catch cans are bullshit(IMO) with
Like.
I took the @mrmatto method of upgrading to the mk8 PCV. -
yakev724 replied to the thread OEM Euro MPI Intake Manifold NIB.sold
-
yakev724 reacted to dood.'s post in the thread Understanding the MK7 PCV function, retrofitting the MK8 PCV, and why catch cans are bullshit(IMO) with Like.
I mean how can you argue with this? From the BMS website: “It's no secret that the Mk7 turbo motors can suffer from oil control...
-
yakev724 replied to the thread OEM Euro MPI Intake Manifold NIB.allows you to add MPI, more fuel, more power small added benefit of intake valves being cleaned by way of the fuel
-
Hi. It looks like you’re in NYC like me. I’ll buy this from you if you still have it. Thanks
-
yakev724 replied to the thread OEM Euro MPI Intake Manifold NIB.yep I do - shoot me a PM to coordinate
-
yakev724 reacted to DerHase's post in the thread Understanding the MK7 PCV function, retrofitting the MK8 PCV, and why catch cans are bullshit(IMO) with Love.
www.datadrivenmqb.com/drivetrain/crankcase-logging-on-track Links should go live just in time for @tigeo 's morning poop.
-
yakev724 reacted to mrmatto's post in the thread Understanding the MK7 PCV function, retrofitting the MK8 PCV, and why catch cans are bullshit(IMO) with Like.
J14091K-VW
-
yakev724 replied to the thread CV Axle Replacements.Can replace the entire CV joint as well. OE GKN/Lobro available from trodo.com FCP carries the boots (cross listed w Porsche Cayenne...
-
-
yakev724 replied to the thread Understanding the MK7 PCV function, retrofitting the MK8 PCV, and why catch cans are bullshit(IMO).Believe these are the ECU SAI sensor pins, ordered what I need to rig up a harness for my (non-SAI) car to run a PCV pressure sensor in...
-
