3D Printer & C.A.D. Thread

[GolNat]

Both of my Prusa’s have been amazing. Only issue I have with the one is jamming occasionally because it has an aftermarket nozzle on it. The stock printer has been trouble free and it has 136 days of print time. I bought it with 92 print days on it.

Have watched reviews on the Bamboo machines and they are very impressive. Can’t go wrong with either IMO unless you want open source.

 

[DSC808]

Every couple months my Creality will have a bad print. No idea why. Just finished a 6hr print and started a 3hr print. Came home and it was a massive blob around the hot end. Looks like it just stopped moving and continually extruded at the same spot. Heated up the nozzle and started snipping plastic blobs off. Accidentally snipped the wire for the temperature sensor since it was encased in plastic. So I can no longer remove the plastic since I can't heat up the hotend. Have to order a new hotend/extruder. Annoying.

 

[aegis]

Every couple months my Creality will have a bad print. No idea why. Just finished a 6hr print and started a 3hr print. Came home and it was a massive blob around the hot end. Looks like it just stopped moving and continually extruded at the same spot. Heated up the nozzle and started snipping plastic blobs off. Accidentally snipped the wire for the temperature sensor since it was encased in plastic. So I can no longer remove the plastic since I can't heat up the hotend. Have to order a new hotend/extruder. Annoying.

This happened to our Dremel. I ordered the replacement parts but we just ordered the Xi instead. Fingers crossed, no unattended issues yet with it.

 

[Acadia18]

Had a buddy print me this off his X1C

 

[GolNat]

And that is what exactly?

Turned out good. Love the X1’s multi color.

 

[Acadia18]

And that is what exactly?

Turned out good. Love the X1’s multi color.

Ban

 

[Acadia18]

It's the map of the light world from Zelda Link to the Past

 

[DSC808]

And that is what exactly?

Turned out good. Love the X1’s multi color.

Kids nowadays....