Hers my rig. I custom made all the cables, super clean without any balls of wires shoved behind the motherboard.
Hers my rig. I custom made all the cables, super clean without any balls of wires shoved behind the motherboard.
I have been wanting to go to hard acrylic lines and water cool the video cards (Probably switch them out to 980's if I do) but have been too busy building rigs for other people to do much with mine.
Specs:
Intel i7 4930K
Asus Rampage IV Extreme black Edition
G.Skill 32GB (4x8GB) DDR2400c10
Samsung 840 pro 512GB
2x 2TB WD Black
2x eVGA 780ti classified cards + aluminum back plates
eVGA lighted SLI bridge
Corsair 900D case
Corsair AX1200i power supply
8x SP120 / 4x AF120 /1x AF140 Corsair quiet edition fans
Swiftech Apogee HD CPU water block
Swiftech MCP35x2 pump
Swiftech MCR420-XP quad 120mm radiator
Primochill CTR 250 res.
I suck with pictures: [pic]
The res is frosted itself, its just filled with distilled water and a few drops of PT nuke. Planned on adding a white LED tube to light the whole res up but ultimately decided against it to keep it clean/simple.
Sweet! I have the same case and color combo and I'm running the same kind of coolant. I've actually added some glycerin to the mixture to act as a water wetter.
You have to be careful it does not react with the tubing, many will have the flex agent weep onto the inner surface. The only thing I have found that didn't have issues was Swiftechs coolant, I've used it in Tygon and Primochill tubing.
my $15k MotherBase PC