After taking off the 2 screws picture my plate still remains on. What do I do to take it off?
R Ronsgti Ready to race! Jun 28, 2012 #1 After taking off the 2 screws picture my plate still remains on. What do I do to take it off?
Shini Go Kart Champion Jun 28, 2012 #5 I wish I lived in a state where it wasn't illegal to remove mine
mkvince Go Kart Champion Jun 28, 2012 #7 Ronsgti said: Do I pull hard going down or pulling back. Click to expand... pull it up and out! the bracket has clips that sit on the honeycomb grille.
Ronsgti said: Do I pull hard going down or pulling back. Click to expand... pull it up and out! the bracket has clips that sit on the honeycomb grille.
zee Go Kart Champion Jun 28, 2012 #8 Two clips on the lower part are holding it to the grill. Looks at the link below and you'll understand how to pull, lift or pry it off the grill http://www.ecstuning.com/Volkswagen-Golf_VI--2.5/Exterior/Body/ES1874408/
Two clips on the lower part are holding it to the grill. Looks at the link below and you'll understand how to pull, lift or pry it off the grill http://www.ecstuning.com/Volkswagen-Golf_VI--2.5/Exterior/Body/ES1874408/
nvturbo Go Kart Champion Jun 30, 2012 #9 I'm glad a front plate is not required here in NC. Fortunately, I was able to cut up the plastic plate holder to cover/block the air vent (OSIR boost gauge install). Have to use some ingenuity when needed.
I'm glad a front plate is not required here in NC. Fortunately, I was able to cut up the plastic plate holder to cover/block the air vent (OSIR boost gauge install). Have to use some ingenuity when needed.