Diggs24
Autocross Champion
- Location
- de plains! de plains!
- Car(s)
- 2015 GTI
yep
That is the power feed for the e-sensor harness. If you aren't using an e-sensor then that purple wire, the grey wire and the black ring connector is not needed.
Where did you folks end up running the purple switched 12v line? It’s not in the latest instructions (nor mention of the ground). Called PR and they said any switched 12v will do. This one specifically? He did say they plan to incorporate a location in the next version of their install doc.
View attachment 179086
Thanks guys
Did you end up using one of the aftermarket kits or just swapped injectors and kept everything else stock?
I ordered a euro manifold complete and wondering if I can get away with just ordering a set of matched 925cc injectors and PR harness or need to shell out for the whole kit, thicker lines, etc.
My car is ROW so I already got MPI. I only change injectors and change MPI feed line. ROW cars have MPI feed line from HPFP so I will plug that feed and use APR tee to connect MPI before hpfpDid you end up using one of the aftermarket kits or just swapped injectors and kept everything else stock?
I ordered a euro manifold complete and wondering if I can get away with just ordering a set of matched 925cc injectors and PR harness or need to shell out for the whole kit, thicker lines, etc.
(will be installing LPFP, hybrid, and getting a tune after, don't care about flex).
Thx
You don't need bigger lines with a hybrid, though you may need a T fitting and retaining clips for the euro rail. This is the setup my usual shop recommended, they've got another mk7 guy using the full euro setup with id1050x's and it's working great.
My car is ROW so I already got MPI. I only change injectors and change MPI feed line. ROW cars have MPI feed line from HPFP so I will plug that feed and use APR tee to connect MPI before hpfp