The TT LCAs have adjustable ball joints (yes, running OE Febi parts) - however the track is already wide (TT geometry is a bit different) so I couldn't go past ~halfway on the adjustability without compromising tie rod end length, not enough threads left. Will let my shop take care of alignment next week, will post results then.
Yes, they should work fine with standard alu spindles, @odessa.filez is the resident expert and is running them with steel spindles.
One thing to be aware of is aftermarket bushings won't fit in the TT arms (I tried and failed fitting a set of rear poly bushings). The TT bushings they come with are already solid, and superpro poly front bushings will fit fine if you really want to run those.
Yes, they should work fine with standard alu spindles, @odessa.filez is the resident expert and is running them with steel spindles.
One thing to be aware of is aftermarket bushings won't fit in the TT arms (I tried and failed fitting a set of rear poly bushings). The TT bushings they come with are already solid, and superpro poly front bushings will fit fine if you really want to run those.