Luiz Henrique
Ready to race!
- Location
- Brazil
- Car(s)
- GTI
Guys, something very strange is happening, I did the installation of modules, cables and mirrors correctly, when I went to code with VCDS, I noticed that the main module did not have the parameters, so I went in with odis engineering and saw that the 3C module was showing the message : 3C - Lane Change Assistant ( coded > Actual Installation not detected ) and where it shows the Can Network number, it says BUSMASTER 0. I contacted the seller and he sent me the file with the parameters for installation in the module, I did the installation of the file in the module, but the problem still remains, the only Can network that the module is recognized is the Can 4 network! The module is not recognized on the Can 5 Network. The thing that I found strangest is that the information of the network name is ( Busmaster 0 ), similar to the description of the Gateway ( Busmaster 1 ).