SierraCarrera's latest activity

I swapped, drove, and bedded them in for a few days before the track days. Not horribly squeaky surprisingly. I still have them in...

Ben from Littco did a daza and dq500 swap on his clubsport in the driveway and kept it fwd.

Removing anything ECS is always a win.

Forgot to setup dongle/ST while on track this past weekend, but removing my ECS catch can, replacing AP PCV with BL Revision and putting...

Track name: Mid-Ohio Track location: Lexington, OH Lap time: 1:45.9 Year/model: 2017 GTI Estimated total vehicle weight with driver...

Happy to report that my iSweep 3500s (on Neuspeed BBK) held up really, really well at Mid-Ohio, they only got better the hotter it got...

I'll also be trying IS3500s in early May at Mid-Ohio, on the Neuspeed BBK. I ran EBC Blues before that did not hold up so hoping these...

That looks like a VERY questionable amount of thread engagement on those ball joint studs. :oops:

Teaser pics! We had a NASTY series of storms hit yesterday. Rain slowed me down, as did an extended job on a customer’s 2023 GLI. There...

Guess this isn't enough? :LOL: https://singervehicledesign.com/#porsche-disclaimer

I run them in the rear so no drama, I would run something better up front, they are a 900 deg pad for sure.

I'll take the 2 front ones off your hands

I had EBC Blues with a BBK + ducts and they weren't great so just be careful. 3-4 laps in, the stopping power felt weaker each braking...

Some noise, but all track worthy pads will be the same. Doing everything I need them to do, easy to modulate, quick to warm up, and dust...

3000s aren't super squeaky? Have they been good on track for you?