[HOW TO PATCH Component Protection] MIB2/MST2 Delphi HeadUnit (MST2_VW_xxxxxD) patch [FEC/SWAP/CID/CP]Android Auto,CarPlay and many more

[Marcom89]

Hi guys, In my unit the code 00060400 (sport monitor) is not supported. Do you know if with this patch I can have it too?

 

[Latron]

Ok so I did the Congo and Duke activator, it didn't remove CP. I have MST2_US_VW_P0890D software in the Radio. I found the patch delphiin.ifs for my software version and loaded it onto the SD card with the delphi.sh file. Both in the root with nothing else on it. I loaded it and now my radio comes up to the VW screen then restarts. If i put the SD card back in it comes up with the blue screen that says updating then goes to the green screen saying successful. When I take the SD card out and restart it it then does the same thing, VW screen then restarts. I cannot find the 0890D firmware anywhere to download. Is there any way to fix this?

 

[TEG]

Ok so I did the Congo and Duke activator, it didn't remove CP. I have MST2_US_VW_P0890D software in the Radio. I found the patch delphiin.ifs for my software version and loaded it onto the SD card with the delphi.sh file. Both in the root with nothing else on it. I loaded it and now my radio comes up to the VW screen then restarts. If i put the SD card back in it comes up with the blue screen that says updating then goes to the green screen saying successful. When I take the SD card out and restart it it then does the same thing, VW screen then restarts. I cannot find the 0890D firmware anywhere to download. Is there any way to fix this?

I just used the unbroken version without any issue, I just updated VIN and VCRN to have the fecs as "original" but SportHMI was loaded from exception list.
You can download 0890D from (using guest / guest):
https://mibsolution.one/#/1/9/MST2 - DELPHI/Firmware/VW/US

Be sure your car is US version (I think so since you're at Dallas).

 

[brentgti]

I just used the unbroken version without any issue, I just updated VIN and VCRN to have the fecs as "original" but SportHMI was loaded from exception list.
You can download 0890D from (using guest / guest):
https://mibsolution.one/#/1/9/MST2 - DELPHI/Firmware/VW/US

Be sure your car is US version (I think so since you're at Dallas).

For reference, it is generally not necessary to edit the VIN or VCRN and just run the activator. Should still work fine.

Additionally, the directory you linked does not contain MST2_US_VW_P0890D firmware.

 

[Fortu]

Hi all, I have a Tiguan 2016
This is my MIB2 Delphi unit:
- MST2_EU_VW_P0220D
- 3Q0035846
- it was not patched ever, just original firmware
I want to remove the sd card CID lock but i dont know to do it.
its to insert not original sd with maps
Thanks.

 

[GTDinGermany]

I activated via congo & duke v3.0, and everything worked to get carplay. Thanks for this great software, guys!

BUT - I have b201a error. I see how to fix it with the updated code - However, OBDeleven wants 69.99 EUR to update this one value.
I decided not to pay, and turned the car off and back on, and carplay and everything is still working.

Is it going to be a problem if I don't pay 70 EUR for the pro version of OBDEleven and update it with the correct value?
what symptom or issue would occur? Because so far I see no problem other than some codes when I am connected via OBD2.

I'm really dissapointed by the lowest price of this software to update a single value after already spending $70 on the OBDeleven reader.