uberdot
Autocross Champion
- Location
- Ten Forward
- Car(s)
- Silver 2017 6MT
Thermostat housing?Looks like dried coolant.
Thermostat housing?Looks like dried coolant.
Thanks Giorgio, found the source (I think). There’s a fluid pool in my new manifold cover:Probably somewhere up top along the hardline.
Here's my dumb question for the day...I recall reading somewhere on here that on the DSG equipped models, we need to push the brake pedal down further at a stop to make sure the clutch disengages...any truth to this or have I been mashing my foot down after I am stopped for no reason?
Here's my dumb question for the day...I recall reading somewhere on here that on the DSG equipped models, we need to push the brake pedal down further at a stop to make sure the clutch disengages...any truth to this or have I been mashing my foot down after I am stopped for no reason?
Curious why go IS38 at that point? IE stage 2 on 91 is 243 HP/344TQ @ Crank and 221/313 at the wheel - This is based off 155HP/195TQ Crank & 141/178 stock at the wheel on their dyno. You can flash back to stock with their dongle (UM and APR require dealer visits), so you just need to swap DP every few years for smog.
I'm currently stuck picking between UM, APR, and IE for my 1.8T tune. I'd love to go IS20 or 38, but California Smog seems to limit that. APR it seems you can go IS20 without a DP tune according to their website, or at least the Dyno charts as someone else pointed out. UM would be nice, but don't think will fit beyond Stage 1, shot Frank @ UM an email to get more info on their emissions. APR may work up to an IS20, and IE for $700 I can just send it Stage 1, and upgrade to 2 for 100 bucks more once I get an TMIC and DP upgrade.
I really want to take a class to teach me how to disassemble and assemble an engine... seriously. Where could I take one OR is that more part of larger automotive tech classes?
I’m serious too...I want to do a complete profession change
See that’s my issue.... if it’s regular school hours, I still gotta workGo to a trade school.
If I could make what I make now doing that I would too. Also good Mad Max skill to have.I really want to take a class to teach me how to disassemble and assemble an engine... seriously. Where could I take one OR is that more part of larger automotive tech classes?
I’m serious too...I want to do a complete profession change