APR MK8 GTI Stage 3 (OEM) - 478 HP!

[Arin@APR]

Product Page

We're excited to announce our Stage 3 OEM Engine Control Unit (ECU) Upgrades are now for the Volkswagen GTI (MK8) 2.0 TSI EA888 Gen 4 engine with the Continental Simos 19 ECU! This tune is designed for use with the larger OEM Continental turbocharger found on vehicles such as the MK8 Golf R / S3 (8Y). Expect massive gains with up to 410-478 HP with 400-443 FT-LBS of torque on tap, depending on octane and mods! This represents up to 111% more horsepower at the wheels, over stock, all without touching the factory exhaust system, fueling system, or any sensors!



Want to see more graphs at the wheel, crank, gain over stock, high torque, low torque, and all octanes? Check out our Product Page.

Key Features:

• Multiple tunes for various octanes, stages, and hardware configurations
• Installs directly to your factory ECU through the OBDII port
• Massive gains: 410-478 HP / 400-443 FT-LBS, +142-211 WHP / +119-179 WFT-LBS, +74-111%
• Multiple octanes: 87 AKI, 91 AKI, 93 AKI, 100 AKI, 104 AKI, E60-E85 Ethanol, and RON equivalents
• Maximum focus on engine reliability: Advanced thermal protection, thermal management, turbo shaft speed, knock & LSPI protection, and more
• Optional factory term limit matching powertrain warranty with APR Plus
• No hardware required for Ethanol support
• APR TCU Upgrade unlocks more torque output
• Standard features such as an increased RPM soft limiter, left foot braking, brake boosting, speed limiter removal, and rescaled gauges
• Auto Start/Stop defaults to your preference (on or off)
• Linear and flat torque mapping and optional torque limited files for manual transmission
• ECO mode limits output to promote fuel savings
• No hardware required, but supports bolt on modifications and our TCU Upgrade
• Stages available to support the factory Golf R / S3 Continental turbocharger
• Flash counter does not increase with each flash
• Free lifetime updates and 30 day money back guarantee[/url]
  
  Product Page is filled with more details under "Upgraded Turbocharger Software (Stage 3)" including all of the details to do the swap. #goapr

 

[Arin@APR]

We’re excited to announce APR Stage 1, Stage 2, and Stage 3 software updates are now available for 2.0T EA888.4 engines found in vehicle such as the MK8 GTI, Golf R, 8Y S3, and Arteon! With this latest update, you can achieve full torque on DSG-equipped vehicles without the need for a TCU upgrade! This update applies to North America with ROW market vehicles, including other makes and models, updating in the coming weeks.

Previously, a TCU upgrade was necessary to reach maximum torque. However, our new update provides additional coding to the ECU, eliminating this requirement. Rest assured, the ECU and TCU continue to work in harmony, accurately calculating engine load and torque to ensure smooth gear shifts and the proper clutch pressure needed to hold torque.

For GTI (245 HP) platforms you can now install the latest high-torque software. Adding our TCU upgrade, if available, will further enhance your driving experience and deliver faster acceleration. Our own 0-60 testing saw a further .16s reduction taking our Stage 3 E85 equipped GTI from 5.12 seconds down to 4.96 on the street with the TCU added!

For Golf R, S3, and Arteon (280-333 HP) platforms even more options are available. By installing the highest torque software, you can instantly unlock maximum torque. For an even more exhilarating experience, consider adding our TCU upgrade, if available, with the TCU specific high-torque file. This offers further enhancements, particularly to launch control, which requires the TCU to be safely unlocked. Our own 0-60 testing saw a further .94s reduction taking our Stage 3 104 AKI equipped Golf R from 4.25 seconds down to 3.31 seconds on the street with the TCU added! Manual transmission customers seeking maximum performance in all scenarios should also install the TCU-specific high torque software.

All of these updates apply to version 1.2.2 and higher on each stage and platform. North American software will be ready by this evening, September the 20th, 2024 with ROW files to be announced separately. As always, APR’s software enhancements are available at no extra cost to existing customers!

Have questions or want to speak with an expert? Don’t hesitate to call or email us anytime!

GO APR!