I bought a used MK5 about a year ago. I knew the sunroof wasn’t working. Yesterday I started to troubleshoot the problem. The connector was put back on the motor and when I rotate the switch to open, the panel seems to move aft on the right side but not the left. The panel starts to open crooked then stops. When I push the forward side of the knob upward, the panel opens crooked but moves about two to three inches aft. Now when I turn the knob to open all the way it opens all the way but still the right side moves more than the left. You can visually see the panel still opens crooked but not much, maybe a quarter inch offset. Same when closing. With the knob at the close position it closes crooked. The left side touches the frame first then the right until fully closed, but then backs it self open about two inches. Rotating the knob to tilt closes the panel all the way but the panel never tilts up. Where should I start? Can anyone help? TIA