daconchslop
Autocross Champion
- Location
- SC
- Car(s)
- ACS SE/Tech
Humble Mechanic uploaded a pretty well done video on the removal/install of the IM.
x2Mine were all yellow.
Mine were all yellow.
LPFP pressure was not registering. Make sure you get grey and blue wires fully seated (THANKS RAILROADER!). Those wires suck, FYI.
These are very handy tools for the job:
https://www.amazon.com/gp/product/B07CP19CKZ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B0719N297G/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Another tip, a pair of locking forceps makes the red wire into the fusebox simple, no need to pop it out. Snake it in there with your fingers, snap it down into forceps, look straight down through where it's supposed to seat and guide it on up there. Done.
If you have that opening then you don’t.
Sorry, no ethanol sensor for me so I just zip tied it away.