JerseyDrew77
Autocross Champion
- Location
- Virginia & NC
- Car(s)
- 2016 TR GTI S 6MT
Did the walls have some damage to them prior to?83. Had to
Did the walls have some damage to them prior to?83. Had to
YesDid the walls have some damage to them prior to?
Do you also have a Fluidampr?Updated the wrong thread. This is the result of tearing the engine down after all the metal debris. Rods 1-3 were fine. #4 along with Main bearings at that end were trashed. They think vibration from something. Who knows. They found some of the flywheel bolts weren’t tight. But they installed that and I never touched it.
Not sure if that could cause a problem.
So what now?Updated the wrong thread. This is the result of tearing the engine down after all the metal debris. Rods 1-3 were fine. #4 along with Main bearings at that end were trashed. They think vibration from something. Who knows. They found some of the flywheel bolts weren’t tight. But they installed that and I never touched it.
Not sure if that could cause a problem.
I did not. I’m going to this timeDo you also have a Fluidampr?
It’s repairable with new bearings and polishing of the crankSo what now?
Interesting. I wonder if that would have prevented your issue.I did not. I’m going to this time
I bet that's what you tell all the ladies.It’s repairable with new bearings and polishing of the crank
I wonder as wellInteresting. I wonder if that would have prevented your issue.
Should I do valve springs while it’s apart?
Yes.Should I do valve springs while it’s apart?
Which onesYes.
all of themWhich ones