DallasDub94
Go Kart Newbie
- Location
- DFW
- Car(s)
- 18 GTI S
Looking for some advice:
I currently have a bbk ready to go on the car, that takes care of the front. At the same time I want to go ahead do a mild upgrade to the rears. I know the rears don't do much braking so not much, if any upgrade is necessary. However, I do have a track day next month.
I was thinking:
Centric Blanks or Stoptech Slotted
EBC Yellow (would get from FPC)
SS Lines
And RBF600 or RBF660 Fluid
Any different suggestions? Would there been any advantage to slotted rears?
I was looking for Ferodo 2500s, but it seems they don't make them for non-pp rears. Unless I somehow flat out missed them and someone has a link.
TLDR: What do you suggest for NON-PP rear rotors and pads for Street car that also sees track time a few times a year?
TIA for the help.
Car Setup:
18 GTI S (DSG, non-PP)
Engine:
EQT Stage 2 93/E85 + dsg tune
MST Intake/Inlet
MAP catted Downpipe
X-force Varex Catback
Do88 Intercooler
Denso IKH01-24 (5750) Sparkplugs
MSD coilpacks
Suspension/Mounts
ORT RS Coilovers
034 Street Density Shock Mounts
034 RCO Ball Joints
034 Streetsport Motor mounts
034 Upper/Lower Inserts
034 Pendulum Mount
034 Adjustable End Links (Rear)
Neuspeed "Race" RSB 27mm
034 MQB Front Subframe Locking Collar Upgrade Kit
TyrolSport Deadset Subframe Kit (Rear) FWD MQB
Michelin PS4S 245/40r17
Motegi Traklite 3.0 17x8.5 et42
Probably will get a set of RT660s 245/45R17 soon
I currently have a bbk ready to go on the car, that takes care of the front. At the same time I want to go ahead do a mild upgrade to the rears. I know the rears don't do much braking so not much, if any upgrade is necessary. However, I do have a track day next month.
I was thinking:
Centric Blanks or Stoptech Slotted
EBC Yellow (would get from FPC)
SS Lines
And RBF600 or RBF660 Fluid
Any different suggestions? Would there been any advantage to slotted rears?
I was looking for Ferodo 2500s, but it seems they don't make them for non-pp rears. Unless I somehow flat out missed them and someone has a link.
TLDR: What do you suggest for NON-PP rear rotors and pads for Street car that also sees track time a few times a year?
TIA for the help.
Car Setup:
18 GTI S (DSG, non-PP)
Engine:
EQT Stage 2 93/E85 + dsg tune
MST Intake/Inlet
MAP catted Downpipe
X-force Varex Catback
Do88 Intercooler
Denso IKH01-24 (5750) Sparkplugs
MSD coilpacks
Suspension/Mounts
ORT RS Coilovers
034 Street Density Shock Mounts
034 RCO Ball Joints
034 Streetsport Motor mounts
034 Upper/Lower Inserts
034 Pendulum Mount
034 Adjustable End Links (Rear)
Neuspeed "Race" RSB 27mm
034 MQB Front Subframe Locking Collar Upgrade Kit
TyrolSport Deadset Subframe Kit (Rear) FWD MQB
Michelin PS4S 245/40r17
Motegi Traklite 3.0 17x8.5 et42
Probably will get a set of RT660s 245/45R17 soon
Last edited: