VWR Lowering springs Install Torque specs

[yunogti]

Hey guys I am in the process of installing my VWR lowering springs and I was womdering where can you find the torque specs for all the hardware. I ordered the installation kit from ECS but I would like to make sure I have all torque specs on hand when doing the install .

And just a heads up Im not doing the 2X4 method lol .

thanks in adavnce !

 

[Jarbear]

Suspension

Full Manual

 

[VL3X]

Here are the specs (assuming you don't want to sort through a 378 page doc):

Front torque specs:

• Front strut mount bolts: 15Nm + 90 degree additional turn
• Front sway endlinks: 65Nm
• Front pinch bolts: 70Nm + 90 degree additional turn (tighten the nut while holding the M14 triple square in place)
• Front (stock) strut top lock nut: 60Nm

Rear torque specs:

• Rear sway endlink bolts: 20Nm + 180 degree additional turn
• Rear lower shock bolts: 70Nm + 180 degree additional turn
• Rear lower control arm bolts: 70Nm + 180 degree additional turn
• Rear top shock mount bolts: 50Nm + 45 degree additional turn

 

[BenVisbeen]

Here are the specs (assuming you don't want to sort through a 378 page doc):

Front torque specs:

• Front strut mount bolts: 15Nm + 90 degree additional turn
• Front sway endlinks: 65Nm
• Front pinch bolts: 70Nm + 90 degree additional turn (tighten the nut while holding the M14 triple square in place)
• Front (stock) strut top lock nut: 60Nm

Rear torque specs:

• Rear sway endlink bolts: 20Nm + 180 degree additional turn
• Rear lower shock bolts: 70Nm + 180 degree additional turn
• Rear lower control arm bolts: 70Nm + 180 degree additional turn
• Rear top shock mount bolts: 50Nm + 45 degree additional turn

what kinda torque wenches would I need

 

[GTIfan99]

A couple ugga duggas

 

[THEREALVRT]

Suspension

Full Manual

bump for this