VrstewartW
What is a Ronaldo?
- Location
- Riverside, NJ
I just tried this to see what it would look like and took some pics just in case someone wanted to try it also. Dont mind the dirty car. :biggrin:
Tools: Phillips Screw driver
Torxscrew driver (not sure what size i used)
regular front view
First, look at the top side of the bottom grill and look for two screws, unscrew those. Heres where they should be located.
Now, pop the hood and you should see this. Use the torx screw driver to unscrew the screws on the left and right side and pull the tabs and just wiggle the whole assembly out. Should come out pretty easily.
Now that you got the grill out, flip it around and youll see three tabs. Pull the tabs the direction of the arrows. The one going left and right was kinda hard, had to wiggle it in both directions.
Now just reassemble everything back. You can still see where the emblem was but you can always dremel it out if you choose.
Tools: Phillips Screw driver
Torxscrew driver (not sure what size i used)
regular front view
First, look at the top side of the bottom grill and look for two screws, unscrew those. Heres where they should be located.
Now, pop the hood and you should see this. Use the torx screw driver to unscrew the screws on the left and right side and pull the tabs and just wiggle the whole assembly out. Should come out pretty easily.
Now that you got the grill out, flip it around and youll see three tabs. Pull the tabs the direction of the arrows. The one going left and right was kinda hard, had to wiggle it in both directions.
Now just reassemble everything back. You can still see where the emblem was but you can always dremel it out if you choose.