Darryl@HPA
Ready to race!
HPA Motorsports is excited to introduce for the first time into the global market, a high performance intake manifold for the Volkswagen 2.0T family of engines. 2.0T owners have been waiting for a product like this since the engine's launch in 2006, and now it's finally here.
Featuring better flow, higher boost capacity, and integrated flapper delete; this product will take your 2.0 VW TSI and FSI to the next level. A direct bolt-on replacement for your OEM plastic intake manifold, HPA's performance manifold features a 40% increase in volume over the OEM plenum, and its cast aluminum construction supports larger turbos and higher boost resulting in big potential performance gains.
HPA's Performance intake when combined with our STG2SR V1.01 calibration for FSI expands the powerband from 4600 through redline. Gains between 15 to 25 HP are seen through the upper RPM generating a new fresh pull out of your 2.0T!
Expand your 2.0T's Horizons...
**Estimated install time 4.5 hours**
HPA's performance intake manifold is cast at our local foundry and machined in house at our development center in British Columbia, then powder coated with a satin-black finish for durability and greater heat dissipation.
*Note: This is an aftermarket manifold that may not be certified to meet your local emissions regulations.
More details on HPA's 2.0 FSI and TSI Intake Manifolds can be found here.
If you have additional questions regarding our 2.0 Intake Manifolds or any other HPA products, feel free to IM or e-mail us directly.
To order any of our HPA performance products contact HPA Motorsports at 604.888.7274 and place your order. Visa and MasterCard are accepted, and PayPal can be set up upon request.
Featuring better flow, higher boost capacity, and integrated flapper delete; this product will take your 2.0 VW TSI and FSI to the next level. A direct bolt-on replacement for your OEM plastic intake manifold, HPA's performance manifold features a 40% increase in volume over the OEM plenum, and its cast aluminum construction supports larger turbos and higher boost resulting in big potential performance gains.
HPA's Performance intake when combined with our STG2SR V1.01 calibration for FSI expands the powerband from 4600 through redline. Gains between 15 to 25 HP are seen through the upper RPM generating a new fresh pull out of your 2.0T!
Expand your 2.0T's Horizons...
- Featuring a 40% larger Plenum over OE
- HPA's intake outflows the OE Fsi intake by 24%
- HPA's intake outflows the OE Tsi intake by 12%
- Even distribution across all runners
- (tests run @28"H20/OE 57mm TB, WOT)
- Integrated flapper delete
- Direct bolt-on replacement for your OEM plastic
- Integrated Water Meth port
- Cast aluminum construction
- Durable OEM powder coat finish
**Estimated install time 4.5 hours**
HPA's performance intake manifold is cast at our local foundry and machined in house at our development center in British Columbia, then powder coated with a satin-black finish for durability and greater heat dissipation.
*Note: This is an aftermarket manifold that may not be certified to meet your local emissions regulations.
More details on HPA's 2.0 FSI and TSI Intake Manifolds can be found here.
If you have additional questions regarding our 2.0 Intake Manifolds or any other HPA products, feel free to IM or e-mail us directly.
To order any of our HPA performance products contact HPA Motorsports at 604.888.7274 and place your order. Visa and MasterCard are accepted, and PayPal can be set up upon request.