GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

DIY Footwell lights retrofit - questions

mlewando

Ready to race!
Location
Poland

redbutcher

Ready to race!
Location
Northants
I seriously doubt the wiring is the same. Check out Kufatec who sell the proper kits.

Edit: here's a link here.
 

kevinm1

Ready to race!
Location
Ireland
That kit is very expensive. LED footwell lights are €8 each from the dealer. Make your own loom
 

redbutcher

Ready to race!
Location
Northants
Yup as are most things that you want to retrofit to a Golf at Kufatec:). I guess if you've got the skills/time to make a loom then all good.

Carsystems.pl also do a kit for 50 Euros.
 

mlewando

Ready to race!
Location
Poland
Just bought kit from carsystems.pl - it's my local country supplier thus i got IT in less than 24hours.

Kit looks really OEM - leds are genuine, connectors as well. I'll post some pictures soon.

Unfortunetely they didnt provide any guide... So i have to find some info in internet.

EDIT: photo included




Wysłane z iPhone za pomocą Tapatalk
 
Last edited:

redbutcher

Ready to race!
Location
Northants
That's great news mlewando. Handy living in the same country :).
 

kevinm1

Ready to race!
Location
Ireland
I have a small how-to in my build thread
 

mlewando

Ready to race!
Location
Poland
I have a small how-to in my build thread

Key Kevinm - could you show me the link? I cannot find it and I would rather be well prepared before doing it.
 

kevinm1

Ready to race!
Location
Ireland
Its in my signature ;-)
 

mlewando

Ready to race!
Location
Poland
Its in my signature ;-)

I have read it. The point is I don't have footwell installation at all! Your GTI has front footweel and it's already coded.
There is more thing to do in my case ...
 

kevinm1

Ready to race!
Location
Ireland
Oh apologies I didn't realise you didn't have front lights
 

mlewando

Ready to race!
Location
Poland
Well, I have managed to find proper light sockets and ground connectors in the car.
Dissasembled whole plastic covers underneath steering wheel but unofrtunetely didn't found BCM.
Could anoyone guide me how to locate the correct plug? Any photos, guide etc.. ?

Managed to take photo. There are visible plugs near the OBD plug. Still don't know how to release them?


 
Last edited:

mlewando

Ready to race!
Location
Poland

pmcguire

Passed Driver's Ed
Location
Finland
Are there good "idiot proof" instructions available for this procedure? It looks like one of the things that I could do, but don't want to screw anythign up.
 

mlewando

Ready to race!
Location
Poland
@pmcguire - i can send you detailed instructions regarding the retrofit.
Are you interested mainly in hardware part or coding?


Wysłane z iPhone za pomocą Tapatalk
 
Top