can I use my stock stage 2 intake pipe and stock top with apr k04?
Yes
Sent from my iPhone using Tapatalk
can I use my stock stage 2 intake pipe and stock top with apr k04?
Yeah, I assumed they needed to be changed. HPA didn't mention a MAP sensor, but I'll double check. Thanks for your help!
I was told by Darryl that it is not needed. Maybe your setup differs from mine, but wanted to share what I was told. I'm using their K04 and IM along with their OnePort ecu/tcu software.
My initial log showed just over 2.5bar but they told me they will take care of everything with the stock map. My mechanic is stumped as to why they don't use it and how they'll tune around it. We'll see I guess...
So I JUST got this setup and am still on the initial low boost, and am expecting the revised file/ tcu files next week. It's already a big improvement over stage2, and can't wait to see how next week goes! I'm wondering though what kind of numbers should I expect with my setup? I plan on getting it dynoed once dialed in but want to get an idea of what to expect.
HPA k04 p&p/ceramic coated both sides by socal porting
HPA intake manifold p&p/ ceramic coated
HPA custom ecu tune/stage 3 tcu tune
SPM street tbe- dp ceramic coated
PTP turbo blanket
Red top coils
Fluidyne dampener
FrankenTOP- ceramic coated
Spulen tbp
Do88 ic
Carbonio full intake (going to change though)
93oct Sunoco
What does it take to make 370+whp on 93? The intake manifold is already tapped for dp meth inj, but ran out of $$ for now. Plan on also adding a lsd
Do I run out of fuel or turbo first? Was wondering if doing APR pump and upgraded injectors would be needed
Wait, so the OnePort software only comes with a low boost file, and you have to contact them or wait for another file? I thought it was the same file they used on their race GLI's?
Intake and mounts
What mounts? I've been checking ECS, and they sell a pendulum mount without the puck mount. Think that'll be all I need to help with traction, or should I get motor and trans mounts too?
Just get the 034 Engine and Trans mounts for about $230ish and then get the HPA red puck mount. I wouldn't get the pendulum mount unless you want a significant increase in noise and vibration