777-300ER
Go Kart Newbie
- Location
- St Joesph Mi
If this is the low pass filter, it would be extremely nice when installing an aftermarket sub.
If you access 47 long coding, you can change the coding from fender to dynaudio. I wonder if there is any difference between the two settings
Holy crap this made it sound 3x better. Hello low range! Though not insanely loud (remember tiny little speaker) it hits lower frequencies!
Put mine on 50hz for now and totally rounds out the sound that was missing.
47 Sound system
Adaptation
Scroll all the way down to low frequency and change from 100 to whatever you like. Hit do it and reread channel. Test and enjoy! Was easy to hear the difference.
Not sure of long term abuse to the sub hitting lower frequencies but I’ll risk it as it sounds great.
Had my MK7 for a month or so now and the subwoofer although decent leaves me wondering if some simple mods will take it to a new level.
Based on another thread I flipped it upside down so it’s facing down now and put the spare on top of it. Decent difference in sound, seems a bit fuller, maybe placebo.
Tried different headunit equalizer settings and still working on finding a sweet spot that works.
Seems there is no aftermarket speaker to pop in the same spot and have increased sound.
Did find this random setting in VCDS.. wondering if I can change it to 50 or so and get some lower notes out of it. Granted higher volumes will be a mess.
Any other useful advise outside of getting rid of it and wiring in an uberstealth box and amp?
Had my MK7 for a month or so now and the subwoofer although decent leaves me wondering if some simple mods will take it to a new level.
Based on another thread I flipped it upside down so it’s facing down now and put the spare on top of it. Decent difference in sound, seems a bit fuller, maybe placebo.
Tried different headunit equalizer settings and still working on finding a sweet spot that works.
Seems there is no aftermarket speaker to pop in the same spot and have increased sound.
I found the Kicker Comp RT67 that dimensionally looks like a good fit 2 3/4 mounting depth and by my measurements 3 inches is available in the fender enclosure.
I'll be stuffing with poly fill, as well.
https://assets.sonicelectronix.com/manuals/kicker/2016_comprt_series_manual.pdf
This sub is 1 inch too deep. Even with trimming, it may not fit unless you add a spacer.I ordered this to try. It’s showing unavailable now, but was when I ordered it. Hopefully it shows up. I will be doing polyfill too when I swap.
Memphis Audio PRX6D2 Power Reference Series 6.5 Inch 150 Watt RMS 300 Watt Peak Dual Subwoofer Vehicle Car Audio System https://www.amazon.com/dp/B07BZ6XD29/ref=cm_sw_r_cp_api_i_Gac0Eb4BNKN96
So it is installed. Sounds way better than stock. I needed to trim the trim ring a bit at the edges. Also need to put the rest of the mounting screws in.
So it is installed. Sounds way better than stock. I needed to trim the trim ring a bit at the edges. Also need to put the rest of the mounting screws in.